This is 16 cavity mould, mould delivery after T1, finished in very short time. Because the inside thread needs to be released by force, we need to make sure there is no scratch mark when demolding and assure the filling is balance. The hot runner is 16pcs hot tips of master tip.

Suntime has very effective mold designers. For DFM, it can be finished within 1~2 days, 2D layout within 2~4 days, and 3D within 3~5 days depending on mold complexity. When time is very urgent, we normally make 3D drawing directly after DFM, but of course, it must be based on customers’ approval.

DFM Analysis

DFM Analysis

3D mould design

3D mould design

1. How many molds Suntime Precision Mould can make every year?
150-220 sets of molds. (depends on the size and complexity)

2. What are the industries involved in your products?
Automotive, IoT, Telecommunication, Building, Industrial, Household appliance, Electronic, Packaging, Medical,…

3.What hot runner system do you use?
Yudo, Moldmaster, Incoe, Syventive, Masterflow, Mastertip,Husky…

4. I don’t have part drawings, how can I make quote?
You can take photos of this part showing the structure, and give us the rough dimension of width, length, height and so on. Or, you can send us the samples. We will scan the part and make part 2D & 3D drawings. After your confirmation of the part design, we will start the mold design process.

5. Do you have any Value added service?
“Yes, we have. Except mold making and custom injection molding. We also can provide service:
a). Silicon compression parts.
b). Metal stamping parts (Progressive Die ).
c). Plastic extrusion parts.
d). Die casting second machining and surface treatment (bead-blasting,anodizing…)
e). Plastic and Metal prototypes.
f). Mold design and engineering service. (24/7 communication services & technical support.)”
6. Do you accept small batch production?
Yes，we have 7 injection machines from 90 ton to 400 ton. We accept production from 1pcs to very big volumn.